SK P2-5, SAC305, 88.5%, 20-38μm T4 No Clean Solder Paste
Solderking SK P2-5, SAC305, is a no clean lead free solder paste formulated for lead free applications requiring excellent, defect free soldering of even the most difficult to solder components and board finishes.
High Reliability solder paste flux type ROL1 to J-STD-004B, SK P2-5 offers excellent print definition for fine pitch printing and reduced voiding and head-in pillow defects.
- High reliability solder paste flux type ROL1 to J-STD 004B
- Reduces and eliminates voiding and head-in pillow defects
- Powerful wetting on all board finishes
- Shiny joint finish, Clear minimal residue
- Long tack and open times
- 12 months refrigerated shelf life
- Made in the UK
SK P2-80, SAC305, 88.5%, 20-38μm T4 No Clean Solder Paste
SolderKing SK P2-80 is a no clean, T4 lead free solder paste that offers enhanced printing for miniaturized components. P-80 provides users with increase activation for the most difficult of assemblies.
High Reliability solder paste flux type ROL1 to J-STD-004B. SK P2-80 provides powerful wetting on all board finishes, reduced voiding and long tack times.
- High reliability solder paste flux type ROL1 to J-STD 004B
- Reduces and eliminates voiding and head-in pillow defects
- Powerful wetting on all board finishes
- Increased activity
- Shiny joint finish
- Clear minimal residue
- Long tack and open times
- 12 months refrigerated shelf life
- Made in the UK
SK P9-10, SAC305, 88.5%, 20-38μm T4 Halogen Free No Clean Solder Paste
Solderking SK P9-10, Halogen Free Solder Paste is formulated for lead free surface mount assemblies requiring excellent, defect free soldering for a large range of applications. SK P9-10 provides an excellent solder joint appearance whilst leaving clear, clean post soldered residues. Halogen Free solder paste flux type ROL0 to J-STD-004B.
- Halogen Free
- High reliability flux type ROL0 to J-STD 004B
- Reduces and eliminates voiding and head-in pillow defects
- Powerful wetting on all board finishes
- Shiny joint finish
- Clear minimal residue
- Long tack and open times
- 12 months refrigerated shelf life
- Made in the UK
SK P2-5, SnBiAg, 89%, 25-45μm T3 Low Melting Point No Clean Solder Paste
Solderking SK P2-5, SnBiAg, is a no clean, low melting point, lead free solder paste. The SnBiAg solder alloy provides users with a reflow peak temperature profile of 170°C-180°C and exhibits a shiny solder joint finish..
High Reliability solder paste flux type ROL1 to J-STD-004B, SK P2-5 SnBiAg offers extended tack and open times in excess of three days.
- High reliability solder paste flux type ROL1 to J-STD 004B
- Reduces and eliminates voiding and head-in pillow defects
- Powerful wetting on all board finishes
- Shiny joint finish, Clear minimal residue
- Long tack and open times
- 12 months refrigerated shelf life
- Low Melting Point SnBiAg – 138ºC, Peak Temperature of 170-180ºC.
- Made in the UK
SK P2-80, SAC305, 88%, 15-25μm T5 Fine Pitch No Clean Solder Paste
SolderKing SK P2-80 is a no clean, T5 lead free solder paste that offers enhanced printing for miniaturized components.
High Reliability solder paste flux type ROL1 to J-STD-004B. SK P2-80 provides powerful wetting on all board finishes, reduced voiding and long tack times.
- High reliability solder paste flux type ROL1 to J-STD 004B
- Reduces and eliminates voiding and head-in pillow defects
- Powerful wetting on all board finishes
- Shiny joint finish
- Clear minimal residue
- Long tack and open times
- 12 months refrigerated shelf life
- Excellent print definition for fine and ultra fine pitch printing
- Made in the UK
J-80 SAC305, 15-25μm T5 Solder Paste
The SolderKing J-80 SAC305, 15-25μm T5 is a no clean, lead free jet dispensing solder paste formulated for excellent performance. The J-80 provides users with uniform dots as small as 220μm and exhibits exceptional results when operating at high speed. High Reliability solder paste flux type ROL1 to J-STD-004B and defect free soldering of even the most difficult to solder components and board finishes.
- High reliability solder paste flux type ROL1 to J-STD 004B
- Uniform Dots of 220μm
- Powerful wetting on all board finishes
- Reduces or eliminates voiding
- Shiny joint finish, Clear minimal residue
- Long tack times
- 6 months refrigerated shelf life
- Made in the UK
If you want to know more about our Solder Pastes, fill in the form below.